Pedals are next to fit into the Cobra cabin.
The clutch pedal has been bent outwards before installing to give more room between brake and clutch pedals.
Pedals fitted up into the pedal box which is part of the inner frame that is bolted to the chassis. I still may need to further bend the pedals to make more room between them. Notice the adjustable bias bar on the brake pedal at the top, this model has a separate brake master cylinder for front and rear brakes.
VZ Commodore electronic pedal (Drive by wire) also has to have its metal arm bent to fit in the correct position. This picture shows the arm in its original shape, yet to be bent into the shape it needs to be.
Posted by Classic Revival CR3519 AC Cobra 427